Home  >  Products  >  Impact Test and specimen preparation Metal  >  MKXJJ-5M Charpy Impact Testing Machine
  • Specs
  • Gallery
  • Videos
  • Standard
  • Inquiry Now

1.Working principle:

 The specimen supported by the horizontal beam is struck with a pendulum of known energy, and the specimen is destroyed by a pendulum impact. The impact line is located in the middle of the two seats. The energy difference between the front and rear pendulum is used to determine the energy absorbed by the sample during the failure. The impact strength is then calculated from the original cross-sectional area of the sample.

 

2.Features

1)High quality

The instrument adopts high-hardness and high-precision bearings, and adopts shaftless photoelectric sensor, which fundamentally eliminates the loss caused by friction and ensures that the friction energy loss is much smaller than the standard requirement.

2)Intelligent tips

According to the situation of the impact, the intelligent reminder of the working condition and the interaction with the experimenter from time to time ensure the success rate of the test.

 

3.Technical Parameters

 

Model

KXJJ-5M 

Type

Simply supported beam

Impact speed

2.9m/s

Max. impact energy(J)

1J、2J;4J、5J

Maximum friction loss energy

<0.5%

Raised angle

150±1°

The distance between the pendulum shaft and impact point

230mm

Test span

40mm,62mm(optional)

Power supply

220VAC-15%~220VAC+10%,50Hz

ISO 180:2000 Plastics — Determination of Izod Impact Strength

Your email address will not be public, and * is required.
  • *Subject:
  • *Message:
    Note:HTML is not translated!
  • *Name:
  • *E-Mail:
  • *Phone:
  • *Country name:
Similar Products
  • JB-300B Semi-automatic Impact TesterJB-300B Semi-automatic Impact Tester

    Semi-automatic Impact tester,known as charpy V-notch test, is to determin the anti-impact capability of ferrous metal material with high toughness.

  • Hydraulic Charpy Impact Specimen Broaching MachineHydraulic Charpy Impact Specimen Broaching Machine

    Hydraulic Charpy Impact Specimen Broaching Machine is designed to make V notch or U notch for metal specimens of Charpy impact test. It features hydraulic drive, stepless speed change and bobust structure.

  • Ceramics Impact Testing MachineCeramics Impact Testing Machine

    Ceramic Impact Testing Machine is used for impact test and hollow ware edge flatware and hollow ware center of impact test,they are used to measure the blow energy to produce the initial crack.

  • MKXJJ-50A Charpy Impact Testing MachineMKXJJ-50A Charpy Impact Testing Machine

    The test machine is a simple suspension combined multi-purpose material impact testing machine, mainly used for impact toughness of non-metallic materials.

  • MKXJJ-50GA Pipe Charpy Impact Testing MachineMKXJJ-50GA Pipe Charpy Impact Testing Machine

    The test machine is suitable for homopolymerized and copolymerized polypropylene pipes, unplasticized polyvinyl chloride pipes, etc. 

  • MKXJJ-50M Charpy Impact Testing MachineMKXJJ-50M Charpy Impact Testing Machine

    The testing machine is mainly used for the determination of the impact toughness of non-metallic materials such as rigid plastics (including plates, pipes, plastic.

  • MKXJU-22M Izod And Charpy Impact Testing MachineMKXJU-22M Izod And Charpy Impact Testing Machine

    The test machine is a simple suspension combined multi-purpose material impact testing machine, mainly used for impact toughness of non-metallic materials.

  • MKXGJ-10M Series Pipe Hydrostatic Pressure Testing MachineMKXGJ-10M Series Pipe Hydrostatic Pressure Testing Machine

    MXGJ-10M hydrostatic blasting test machine is suitable for the determination of the damage resistance time of thermoplastic pipes under the condition of instantaneous hydraulic blasting of pipes and long-term constant pressure.