Home  >  Products  >  Elemental Analyzer  >  MARX-9000 ALLOY ANALYZER
  • Specs
  • Gallery
  • Videos
  • Standard
  • Inquiry Now

Main Technical Parameters:

Optical System Optical Structure Flat Field Optical
Grating Focus 350mm
Wavelength Range 200nm-500nm
Detector High resolution CCD Multi detectors
Spectrum Width 25.4mm
Pixel Resolution 30pm
Full spectrum
Light room temperature is controlled automatically
Spark Source Type Digital arc and spark source/New plasma generator
Spark Frequency 100-1000HZ
Plasma Current 1-80A
Ignition Voltage >7000V
Spark Stand Argon flushed with minimal consumption of Argon
Spray discharge electrode technology
Adjustable sample clamp
Others Measurable Elements Al base
Dimension 500mm(L)*450mm(W)*300mm(H)
Weight About 20kg
Storage Temperature 0℃-45℃
Operating Temperature 10℃-30℃, 23±2℃ is recommended
Power AC220V/50Hz(can be customized if necessary)
Power Consumption Excitation: 700W / Stand by:100W
Argon Quality 99.999%, Argon pressure >4Mpa
Argon Consumption 5L/min during spark mode

Features:

1. Portable, intuitive and user friendly.

2. Optimized to customer requirements.

3. Complete analysis within a few seconds.

4. Extreme sensitivity due to latest CCD technology and software.

5. Available for routine analysis of small sample, diameter from 1mm to 8mm

6. Technology support and software update for free.

7. Optimal advisory services, because we are free to give you the advice best suited to your needs.

Your email address will not be public, and * is required.
  • *Subject:
  • *Message:
    Note:HTML is not translated!
  • *Name:
  • *E-Mail:
  • *Phone:
  • *Country name:
Similar Products
  • HIGH-FREQUENCY INFRARED CARBON AND SULFUR ANALYZERHIGH-FREQUENCY INFRARED CARBON AND SULFUR ANALYZER

    MARX-910 Carbon Sulphur Analyzer with high frequency furnace and infrared detection is the ideal instrument for rapid and precise carbon and sulfur analysis in solids, especially with metallic materials but as well with other inorganic materials like ceramics, ores, cement, clays etc. The solid sample is combusted in a ceramic crucible within a sealed high-frequency furnace which is pressurized by a flow of pure oxygen. In order to achieve optimum combustion, the power of the High Frequency furnace is adjustable. The resulting reaction gases CO2 and SO2 are measured by solid-state IR detectors. The system is characterized by its high analytical speed, precision and sensitivity combined with ease of use and almost maintenance free operation.

  • HIGH-FREQUENCY INFRARED CARBON AND SULFUR ANALYZERHIGH-FREQUENCY INFRARED CARBON AND SULFUR ANALYZER

    MARX-900 Carbon Sulphur Analyzer with high frequency furnace and infrared detection is the ideal instrument for rapid and precise carbon and sulfur analysis in solids, especially with metallic materials but as well with other inorganic materials like ceramics, ores, cement, clays etc. The solid sample is combusted in a ceramic crucible within a sealed high-frequency furnace which is pressurized by a flow of pure oxygen. In order to achieve optimum combustion, the power of the High Frequency furnace is adjustable. The resulting reaction gases CO2 and SO2 are measured by solid-state IR detectors. The system is characterized by its high analytical speed, precision and sensitivity combined with ease of use and almost maintenance free operation.

  • I-CHEQX ALLOYS AND METALS HANDHELD XRF ANALYZERI-CHEQX ALLOYS AND METALS HANDHELD XRF ANALYZER

    i-CHEQX offer you the highest analytical stability and precision — with the pull of a trigger, the i-CHEQ alloy analyzer quantifies nearly any element, from Magnesium to Plutonium. Whether in the scrap yard or on the manufacturing floor, i-CHEQX alloy analyzer quickly and accurately identify alloy grades and distinguish between alloy families.

  • PROSPECTOR –EDXRF HANDHELD ALLOY ANALYZERPROSPECTOR –EDXRF HANDHELD ALLOY ANALYZER

    X-ray fluorescence (XRF) provides outstanding efficiency in alloy analysis and sorting.Being a truly non-destructive method it requires minimal sample preparation and provides more versatility than OES. It is suited for analyzing all existing alloy types, which makes it a welcome technology in a scrapyard, construction site, foundry and various other heavy engineering enterprises. XRF analyzers will drastically reduce your analysis time and cost. Unlike conventional analysis in which each new measurement adds cost, XRF cost is 99% initial capital expenditure, which means that each new measurement is more cost effective.